UC-CAL-MS Carousel Autoloader
UC-CAL-MS Carousel Autoloader - Image 2
UC-CAL-MS Carousel Autoloader - Image 3
UC-CAL-MS Carousel Autoloader - Image 4
UC-CAL-MS Carousel Autoloader - Image 5
UC-CAL-MS Carousel Autoloader - Image 6
UC-CAL-MS Carousel Autoloader - Image 7
UC-CAL-MS Carousel Autoloader - Image 8
UC-CAL-MS Carousel Autoloader - Image 9
UC-CAL-MS Carousel Autoloader - Image 10
UC-CAL-MS Carousel Autoloader - Image 11
UC-CAL-MS Carousel Autoloader - Image 12
UC-CAL-MS Carousel Autoloader - Image 13
UC-CAL-MS Carousel Autoloader - Image 14
UC-CAL-MS Carousel Autoloader - Image 15
easy pipe cleaning - pipeline - hydraulic pigging - pigging pipeline
easy pipe cleaning - pigging - hydraulic pigging - pigging pipeline

UC-CAL-MS Carousel Autoloader

The UC-CAL-MS Carousel AutoLoader is the most comprehensive automatic projectile loading, launching, and verification system on the market today. Designed for high-volume production facilities, this unit can be integrated into an automatic assembly line to clean hoses, tubes, or hydraulic assemblies. It comes equipped with four cleaning modes to meet common cleaning procedures: Normal Clean, Air Purge + One Projectile, and Air Purge + Two Projectiles, and Adjustable Timed Projectile Launcher without Verification (perfect for cleaning tube bundles!). These cleaning modes address the most common cleaning issues for purging large dirt particles or liquid residue from hydraulic lines.

The built-in Programmable Logic Controller (PLC) effortlessly guides the user through the cleaning process and also logs fired and verified projectiles or faults. This data can be collected and disseminated for quality assurance initiatives or operator training opportunities.
This unit comes complete with a containment barrel for projectile verification and disposal.

The UC-CAL-MS Carousel AutoLoader comes complete with a containment barrel and five hopper boxes. There are ten hopper boxes available, one each for your choice of any projectile sized 6mm-33mm.

May be equipped with the Marking System (UC-CAL-MARK) to allow the ability to apply indication marks on hoses during cleaning. These marks act as a reference point during stem insertion to assure the fitting is properly installed before the crimp.

  • Automatic projectile loading, firing, and verification.
  • Removes internal contamination from hoses, tubes or pipes quickly and efficiently in a production environment.
  • Ideal for high volume production cells making hose or tube assemblies.
  • Fully integratable in automated tube manufacturing processes.
  • Verifies projectile has exited hose, tube or pipe and entered the Containment Barrel along with expelled contamination.
  • Cleans hoses, tubes and pipes with an internal diameter of 1/4” inch (6mm) through 1” inch (25mm).
  • Easy change-out between 9 Hopper Box options, each handling one projectile size from 6mm to 33mm in diameter.
  • Foot pedal firing device and/or hand held firing device options.
  • Converts unit’s electrical requirement of110V AC-60Hz or 240V AC-50Hz to 24V DC and comes with appropriate electrical cord for easy installation.
  • Built in pre-programmed Programmable Logic Controller (PLC) guides operator through set-up and cleaning process.
  • Built-in Projectile Counter for counting fired and verified projectiles.
  • Built-in air ionizer for removing static electricity for better orientation, loading, and firing of projectiles.
  • Containment Barrel made of plastic and has a stainless steel chute assembly with green, yellow and red lights to indicate system and projectile mode (ready, firing, verified).
  • The Pressure Regulator sets operating pressure at between 80 PSI (5.5 bar) and 110 PSI (7.5 bar).
  • Requires clean, dry air for which the UC-D1 Super-Dry Compressed Air Dryer is strongly recommended.

Related Products