UC-CSS-230V-G2-HG Clean Seal System

The Clean Seal System utilizes heat shrink technology to encapsulate the end of a hose or tube assembly with a Clean Seal Capsule. This eliminates possible re-contamination that is problematic with traditional capping and plugging methods.

Re-contamination occurs when ill-fitting caps and plugs are forced onto assemblies, causing plastic particles to shear off into the hose or tube. The Clean Seal System leaves your assemblies 100% contamination free, and provides an easier, less costly, and more effective solution than traditional capping methods. You’ll never have to deal with an excessive cap and plug inventory again!

Since safety concerns are a major priority for most production facilities, the UC-CSS-230V-G2-HG model is designed with a Heat Guard to protect the operator from excessive exposure to ambient heat. The heat guard fully encapsulates the “hot end” of the unit and is designed with a hot-air exhaust pipe that can be connected to a customer-supplied silicone ducting for diverting heat out of the area of operation.